Hydraulic Universal Pump and Motor Test Stands


Manual Pump Test Stand Model UTS7535


Model UTS7535 Manual Pump Test Stand

Performance Characteristics
• Drive Speed Range 0 - 3000 rpm  
• Drive Horsepower 75 Horsepower
• Circuit 3 Supply Pressure: 175 - 3500 PSIG
• Circuit 3 Supply Flow: 5 - 50 GPM
• Circuit 3 Discharge Pressure: 175 - 3500 PSIG
• Circuit 2 Discharge Flow: 10 - 100 GPM
• Circuit 1 Discharge Flow: 4 - 40 GPM
• Fluid Temperature: Ambient to 180 degrees F max
• Filtration: 3 microns absolute


Facility Input Requirements
  Electrical Power:
• Test Stand: 460 VAC, 3 phase, 60Hz, 200 AMP
• Drive Inverter: 460 VAC, 3 phase, 60Hz, 150 AMP
  Cooling Water:
• Recirculation Loop: 50 GPM@ 20 PSID, 80 degree F inlet


Dimensions
•  Test Stand: 66 in. (W) x 96 in. (D) x 83 in. (H)


Automated Hydraulic Test System Model VP5005D 50 HP


Test System Model VP5005D

Performance Characteristics
• Drive HP: 50 Horsepower
• Drive Speed:  16,500 rpm maximum
• Flow Range: Pumps - 20 gpm maximum
  Motors - 15 gpm maximum
• Operating Pressures: Pump discharge - 5,000 psig maximum
Motor inlet - 6,000 psig maximum
Proof pressure - 6,000 psig maximum
Temperature - 275°F maximum


Facility Input Requirements
  Electrical Power:
• lnverter: 460 vac, 60 Hz, 3-phase, 65 amps full load, 110 amps at 150%
• Test Stand: 460 vac, 60 Hz, 3-phase, 150 amp full load
• Operator’s Console: 120 vac, 60 Hz, 1-phase, 15 amp
Pneumatic: 65-125 psi shop air normal 5 scfm, 40 scfm peak
Cooling Water: 35 U.S. gpm at 80°F at 20 psid


Dimensions
• Test Stand Assy: 66 in.(W) x 142 in.(D) x 82 in.(H)
• Operator’s Console: 24 in.(W) x 29 in.(D) x 72 in.(H)

Get a Free Quote Now Get a Free Quote Now

DTB Certifications and Accreditation DTB Quality Certifications and Accreditations